Polycarbonate sheets,China polycarbonate sheet manufacturer
China polycarbonate sheet manufacturer Foshan Songxia Building Materials Co., Ltd.
Contact Us

Contact

Songxia:Polycarbonate sheet > Polycarbonate sheet manufacturer > Introduction of polycarbonate hollow sheet and polycarbonate solid sheet

Introduction of polycarbonate hollow sheet and polycarbonate solid sheet

First, the advantages of polycarbonate hollow sheet and polycarbonate solid sheet

Advantage 1:transmittance

The endurance plate has a high transmittance of 89%, which can be as beautiful as glass. UV-coated polycarbonate sheets will not produce yellowing, fogging, and poor light transmission when exposed to sunlight. Ten years later, the loss of light transmission is only 10%, and the loss rate of PVC is as high as 15% -20%. The glass fiber is 12 % -20%.

 

Advantage 2: Impact resistance

The impact strength is 250-300 times that of ordinary glass, 30 times that of acrylic plates of the same thickness, and 2-20 times that of tempered glass. There are no cracks when falling two meters below a 3kg hammer. There are 'unbreakable glass' and 'ring steel' 'Good name.

 

Second, the difference between the polycarbonate hollow sheet and the polycarbonate solid sheet

The purpose of the polycarbonate hollow sheet and polycarbonate solid sheet are the same in many aspects, but there are also differences. The polycarbonate hollow sheet has a good thermal insulation effect, so it is generally used in stadium lighting ceilings, room greenhouse lighting ceilings, warehouse lighting ceilings, and carport rain. Shed and so on.

 

With its good impact resistance and high transparency, the polycarbonate solid sheet is more suitable for making outdoor light boxes, protective covers, building decoration, etc. This is unmatched by sunlight panels. Although the sunlight polycarbonate sheet and the polycarbonate solid sheet have many similarities, when selecting the sunlight polycarbonate sheet and the polycarbonate solid sheet, you still need to choose according to your actual use and needs.

 

In addition, the matte type polycarbonate solid sheet evolved from the original polycarbonate solid sheet. When making this polycarbonate solid sheet product, only a part of the mold and manufacturing process need to be changed, and then the surface of the product can be changed, thereby It contributes to a change in vision and performance that is different from the original polycarbonate solid sheet.

 

Third, the attention of the polycarbonate hollow sheet and polycarbonate solid sheet

This will involve the preservation of the polycarbonate solid sheet. It is very simple. Just be careful not to expose it to the sun, if possible, do not remove the protective film on the surface of the polycarbonate sheet;

 

If there is dust on the surface of the polycarbonate sheet, it can be cleaned with clean water. Normally, it can be washed with water below 50 degrees, but remember to use a neutral detergent, not acid and alkaline cleaners. Wash; and after cleaning, rinse with water and then dry.

 

In addition to using the polycarbonate solid sheet in accordance with the regular process, in order to reduce waste, the cut-out polycarbonate solid sheet scrap can be reasonably used. Under normal circumstances, it can be used for future repairs. At the same time, some buildings on the polycarbonate solid sheet can be damaged Repair, and at this time, a small piece of endurance plate may be needed, which is convenient and economical.


Previous:How to choose a canopy canopy? Is it better to use polycarbonate solid sheets or polycarbonate hollow sheet for carports? Next:No More

People who viewed this also viewed